Refill Instructions Cartridge CC653A, #901 for HP Officejet J4580/ J4640/ J4680/J4500/J4540/J4550
HP Cartridge CC653A, #901 Refill Instructions How to refill Black cartridge Instructions
1. Put the cartridge on some paper towels in an area where you can tolerate a spill.
2. Peal off the top label.
3. Fill the syringe with 8 ml. of black ink.
4. Very S-L-O-W-L-Y inject ink into the middle hole or the two top holes (they all go to the same sponge - only half this cartridge has a sponge - the two bottom holes are just air space and are not used - don't put any ink there).
5. When finished leave the label off or place it to where the two top holes are still exposed.
6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.
For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge.
The cartridge will print just like a new one. Even though the cartridge prints good, the ink level gauge will not read full after a refill. A Refill Kit should include Ink plus the following: One 10cc Syringe