Refill Instructions color cartridge HP 110 for HP Photosmart 400/500/600/700/800 series
HP Cartridge C8304A, better know as #110 Refill Instructions How to refill color cartridge HP 110 for HP Photosmart A432/A433/A434/A436/A440/A442/A444/A445/A446/A516/A522/A526/A532/A536/A610/A616/A622/A626/A627/A636/A646/A716/A826 printers Color cartridge
Instructions
1. Put the cartridge on some paper towels in an area where you can tolerate a spill.
2. Peal off the top label.
3. Fill the syringe with 5 ml. of color ink.
4. Very S-L-O-W-L-Y inject ink into each chamber until the sponge is full. A little ink might come out of the top when full, so cover up the other two holes while filling one.
5. When finished leave the top label off and the filling holes exposed (when printing it has to pull in air).
6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.
For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge.
The cartridge will print just like a new one. Even though the cartridge prints good, the ink level gauge will not read full after a refill.